Desktop|中文
Home About Us Products + News Center Technical Articles Messages Contact Us

Product Details

全自动Dielectric Loss Tester-扬州达瑞

Detailed Information of GHC-I 10# I-beam Cable Conductor Trolley Manufacturer - Yangzhou Darui Co., Ltd.

Published: 2020-08-18 15:39:42

Views: 2922

Category: ZT型悬挂滑轨滑车

Product Description


GHC-I 10# I-beam Cable Conductor Trolley Manufacturer's detailed information




Darui Electric recommends



I-beam cable conductor trolley manufacturer



I-beam cable trolley



    The GHC series I-beam trolley device is used for suspending and moving cables during the movement of mobile power supply machinery, and has been widely applied in various types of cranes. This device has the advantages of sturdy structure, flexible movement, and safe reliability.

    The GHC trolley consists of three parts: the traction trolley, cable trolley, and terminal trolley. The traction trolley follows the mobile machinery's cable guiding (traction) device, with one unit per mobile machine, moving back and forth with the machinery. The intermediate cable trolleys suspend the cable within the I-beam track range and move with the traction trolley, with buffer bumpers installed at both ends. The number of trolleys depends on the length of movement. The terminal trolley is fixed at the end of the I-beam guide rail, typically one per mobile machine.

    This series of trolleys is available in five models: I, II, III, IV, and V. If users require 12#, 14#, 16#, or larger I-beams, please specify when ordering, and our factory can supply the complete set.

 



Product Introduction:



 HC series cable trolley is a conductive form for crane trolley power supply. It consists of wheels, brackets, and support plates. The soft cable is fixed on the support plate, and the traction frame moves synchronously with the cable trolley, thereby achieving the purpose of trolley power supply.



The HC series cable trolleys are divided into medium load type, heavy load type, and light load type. Therefore, the trolley wheels are of three types: Ф80, Ф63, and Ф50, with a load capacity of ≤50∽150kg. Each type is divided into single-layer, double-layer, and triple-layer according to the number of support plate layers. Each type has three forms: the front end is the cable traction trolley, the terminal is the fixed wire hanger, and the middle is the cable trolley (see figure below).







Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.

 





WeChat QR Code
💬
💬 Message ✕

Hello! Have you found what you need? Contact us directly online!

Leave a Message for Consultation
Yangzhou Darui Electric Co., Ltd.
主营产品:Dielectric Loss Tester、Transformer Ratio测试仪、Loop Resistance Tester、高压None线核相仪、Insulation Resistance Tester、Partial Discharge Tester、Cable Fault Tester、DC Resistance Tester等。
☎ Phone: 18952707000(关经理)📞 Landline: 0514-88770377✉ Email: 195214804@qq.com
Verification Code
By submitting, you agree to ourTerms of ServiceandPrivacy Policy
🏠 网站Home📞 一键拨号✉ Contact Us