I-Beam Trolley
Detailed Introduction:
I-Beam TrolleyThis series of trolleys comes in five models: I, II, III, IV, and V. If users adopt 12#, 14#, 16#, or larger I-beams, they can specify this when ordering, and our factory can supply the complete set. The GHC-III I-beam trolley device is used for the suspension and movement of cables during the movement of mobile power supply machinery, and has been widely applied in various types of cranes. This device has the advantages of sturdy structure, flexible movement, and safety and reliability.
GHC-III I-beam trolleyThe notable features are the high rigidity of the I-beam, strong load-bearing capacity, easy installation, and smooth operation. It is also equipped with an electric trolley to maintain the same running speed as the traction equipment, thereby reducing damage to the cable during operation. It is especially suitable for situations where the cable is relatively wide or heavy, better demonstrating its superiority.
It can work normally in indoor, outdoor, dusty, and environments with large temperature differences. The TB-GZG type trolley consists of three parts: the traction trolley, cable trolley, and end trolley. The traction trolley follows the cable guiding (traction) device of the mobile machinery, with one per mobile machinery, moving back and forth with it.
The GHC-III I-beam trolley device is used for the suspension and movement of cables during the movement of mobile power supply machinery, and has been widely applied in various types of cranes. This device has the advantages of sturdy structure, flexible movement, and safety and reliability.
The middle cable trolley suspends the cable within the range of the I-beam track and moves with the traction trolley, with buffer devices installed at both ends. The number of trolleys depends on the length of movement. The terminal trolley is fixed at the end of the I-beam guide rail, generally one per mobile machinery. This series of trolleys comes in six models: 6#, 8#, 10#, 12#, 14#, and 16#. If users adopt larger I-beams, they can specify this when ordering, and our factory can supply the complete set.
The GHC-III I-beam trolley consists of three parts: the traction trolley, cable trolley, and terminal trolley. The traction trolley follows the cable guiding (traction) device of the mobile machinery, with one per mobile machinery, moving back and forth with it. The middle cable trolley suspends the cable within the range of the I-beam track and moves with the traction trolley, with buffer bumpers installed at both ends. The number of trolleys depends on the length of movement. The terminal trolley is fixed at the end of the I-beam guide rail, generally one per mobile machinery.
Product Introduction:
HC Series Cable TrolleySeriesLight Load Type Cable Conduction TrolleyDevice is used for the suspension and movement of cables during the movement of mobile power supply machinery, and has been widely applied in various types of cranes. This device has the advantages of sturdy structure, flexible movement, and safety and reliability.
Light Load Type Cable Conduction TrolleyConsists of three parts: the traction trolley, cable trolley, and terminal trolley. The traction trolley follows the cable guiding (traction) device of the mobile machinery, with one per mobile machinery, moving back and forth with it. The middle cable trolley suspends the cable within the range of the I-beam track and moves with the traction trolley, with buffer bumpers installed at both ends. The number of trolleys depends on the length of movement. The terminal trolley is fixed at the end of the I-beam guide rail, generally one per mobile machinery.
This series of trolleys comes in five models: I, II, III, IV, and V. If users adopt 12#, 14#, 16#, or larger I-beams, they can specify this when ordering, and our factory can supply the complete set.
Product Introduction:
The HC type cable trolley series is a form of power supply for crane trolleys. It consists of wheels, brackets, and support plates. The soft cable is fixed on the support plate, and the traction frame moves synchronously with the cable trolley, thereby achieving power supply for the trolley.
The HC series cable trolleys are divided into medium load type, heavy load type, and light load type. Therefore, the trolley wheels are of three types: Ф80, Ф63, and Ф50, with load capacity ≤50∽150kg. Each type is divided into single-layer, double-layer, and three-layer according to the number of support plate layers. Each type has three forms: the front end is the cable traction trolley, the terminal end is the fixed cable hanging frame, and the middle is the cable trolley (see figure below).
Note: The above information and technical parameters are compiled and published by Yangzhou Darui Electric Co., Ltd.
