TL180II Steel Cable Drag High Temperature Resistant Drag Chain
Darui Electric recommends
The TLG type steel drag chain has a maximum travel distance of 40 meters and is suitable for all transmission methods. It can be freely extended or shortened.
In addition, the bending radius can be changed by changing the pin shaft. The width of the support plate of the drag chain is from 150mm to 800mm, and the interval between holes is 5mm. The height of the chain plate, that is, the height of the support plate, is determined by the maximum diameter of the cable. When the machine is running at maximum capacity, if the width of the drag chain exceeds 300mm and the length exceeds 4m, for stability reasons, consideration should be given to selecting a drag chain of a larger size. The bending radius should be selected based on the maximum diameter of the cable and should reach 10 times the cable diameter. The bending radius can be selected from 100-600mm according to the given table, and a smaller radius can be selected accordingly for small strokes.
The length of the drag chain = 1/2 stroke + 4 bending radii, which only applies when the fixed connection is at the midpoint of the stroke. The fixation of the drag chain can be selected according to the position of the machine tool. The fixed angle steel can be placed on the outer or inner circumference, inside or outside the drag chain. Generally, the connection part is inside the drag chain and towards the outer circumference.
TLG series steel drag chain is a new type of steel drag chain, which is a supplement to the TL series. Compared with the TL series steel threading drag chain, it has greater mechanical strength and a more beautiful appearance. Steel drag chains can be quenched and carburized as needed to obtain stronger mechanical strength and toughness. The surface of the steel drag chain can be treated with galvanizing, chrome plating, or nickel plating to adapt to different working environments. Steel drag chain selection technology.
TL series metal drag chain models
