1. Reliable operation, never cause power interruption failures.
2. Can be used in harsh environments such as high temperature, high dust, and highly corrosive gases.
3. High mechanical strength, not easy to bend or deform, can withstand strong short-circuit impact currents.
4. The current-carrying capacity can be set according to user needs, with a maximum of over 3000A, and the voltage level can reach above 5KV.
5. Using copper or copper conductors can greatly reduce the electrical energy loss of the wire.
6. After adding auxiliary cables, it can form a low-impedance sliding contact line, and the conductor impedance is reduced multiple times.
7. Wiring can be done from the top, side, or bottom for sliding contact.
8. The JHG-"I" type contact wire also has advantages such as a particularly large heat dissipation surface, compact and simple structure, and convenient installation and maintenance.
9. The JGH type is composed of a dovetail groove copper bar and high-strength I-beam, and its embedding process ensures the tight combination of the copper bar and the I-beam.
Installation of H-type Single-pole Safety Copper Sliding Wire
The installation methods of the sliding contact line generally include two types: top sliding contact and bottom sliding contact. Other installation methods can also be adopted according to user requirements.
The installation brackets for the sliding contact line are generally one every 3 meters. Under special circumstances, reinforcement measures can also be taken to appropriately expand the distance. The phase-to-phase distance between three sliding contact lines is 400mm. If it is a low-impedance sliding contact line, the phase-to-phase distance can be expanded to 450mm.
