Darui Electric recommends
GHC-Ⅲ I-beam TrolleyThis series of trolleys is available in five models: I, II, III, IV, and V. If users adopt 12#, 14#, 16# or larger I-beams, please specify when ordering; our factory can supply complete sets. The GHC-Ⅲ type I-beam trolley device is used for the suspension and movement of moving power supply machinery during movement, and has been widely applied in various fields. This device has the advantages of sturdy structure, flexible movement, and safety and reliability.
GHC-Ⅲ I-beam trolleyThe notable features are the high rigidity of the I-beam, strong load-bearing capacity, easy installation, and smooth operation. It is also equipped with an electric trolley to maintain the same running speed as the traction equipment, reducing damage to the cable during operation. It is especially suitable for situations where the cable is relatively wide or heavy, demonstrating its superiority.
It can work normally in indoor, outdoor, dusty, dirty, and environments with large temperature differences. The TB-GZG type trolley consists of three parts: the traction trolley, cable trolley, and end trolley. The traction trolley follows the cable guiding (traction) device of the moving machinery; each moving machinery is equipped with one, running back and forth with the moving machinery.
The GHC-Ⅲ type I-beam trolley device is used for the suspension and movement of cables during the movement of moving power supply machinery, and has been widely applied in various types of lifting machinery. This device has the advantages of sturdy structure, flexible movement, and safety and reliability.
The middle cable trolley suspends the cable within the range of the I-beam track and moves with the traction trolley. Both ends are equipped with buffer devices. The number of trolleys depends on the length of movement. The terminal trolley is fixed at the end of the I-beam guide rail, generally one per moving machinery. This series of trolleys is available in six models: 6#, 8#, 10#, 12#, 14#, 16#. If users adopt larger I-beams, please specify when ordering; our factory can supply complete sets.
The GHC-Ⅲ type I-beam trolley consists of three parts: the traction trolley, cable trolley, and terminal trolley. The traction trolley follows the cable guiding (traction) device of the moving machinery; each moving machinery is equipped with one, running back and forth with the moving machinery. The middle cable trolley suspends the cable within the range of the I-beam track and moves with the traction trolley. Both ends are equipped with buffer bumpers. The number of trolleys depends on the length of movement. The terminal trolley is fixed at the end of the I-beam guide rail, generally one per moving machinery.
GHC-Ⅱ type I-beam trolley
Product introduction:
HC series cable trolley serieslight-load type cable conduction trolley device is used for the suspension and movement of cables during the movement of moving power supply machinery, and has been widely applied in various types of lifting machinery. This device has the advantages of sturdy structure, flexible movement, and safety and reliability.
light-load type cable conduction trolleyconsists of three parts: the traction trolley, cable trolley, and terminal trolley. The traction trolley follows the cable guiding (traction) device of the moving machinery; each moving machinery is equipped with one, running back and forth with the moving machinery. The middle cable trolley suspends the cable within the range of the I-beam track and moves with the traction trolley. Both ends are equipped with buffer bumpers. The number of trolleys depends on the length of movement. The terminal trolley is fixed at the end of the I-beam guide rail, generally one per moving machinery.
This series of trolleys is available in five models: I, II, III, IV, and V. If users adopt 12#, 14#, 16# or larger I-beams, please specify when ordering; our factory can supply complete sets.
Product introduction:
The HC type cable trolley series is a conductive form for the power supply of crane trolleys. It consists of wheels, brackets, and support plates. The flexible cable is fixed on the support plate, and the traction frame moves synchronously with the cable trolley, thereby achieving the purpose of power supply for the trolley.
The HC series cable trolleys are divided into medium-load type, heavy-load type, and light-load type. Therefore, the trolley wheels are of three types: Ф80, Ф63, and Ф50, with load capacity ≤50∽150kg. Each type is divided into single-layer, double-layer, and triple-layer according to the number of support plate layers. Each type has three forms: the front end is the cable traction trolley, the terminal end is the fixed wire hanging frame, and the middle is the cable trolley (see figure below).
Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
