Recommended by Darui Electric
HC-Ⅱ I-beam TrolleyThis series of trolleys comes in five models: Ⅰ, Ⅱ, Ⅲ, Ⅳ, and Ⅴ. If users require 12#, 14#, 16#, or larger I-beams, please specify when ordering, and our factory can supply the complete set. The GHC-Ⅲ type I-beam trolley device is used for suspending and moving mobile power supply machinery during movement, and has been widely applied in various fields. This device features a sturdy structure, flexible movement, and safety and reliability.
I-beam trolley The notable features are the high rigidity of the I-beam, strong load-bearing capacity, easy installation, and smooth operation. It is also equipped with an electric trolley to maintain the same running speed as the traction equipment, reducing damage to cables during operation. It is especially suitable for situations where cables are relatively wide or heavy, highlighting its superiority.
It can operate normally in indoor, outdoor, dusty, dirty, and environments with large temperature differences. The TB-GZG type trolley consists of three parts: the traction trolley, cable trolley, and end trolley. The traction trolley follows the cable guiding (traction) device of the mobile machinery, with one per mobile machine, running back and forth with it.
The I-beam trolley device is used for suspending and moving cables of mobile power supply machinery during movement, and has been widely applied in various types of lifting machinery. This device features a sturdy structure, flexible movement, and safety and reliability.
The middle cable trolley suspends the cable within the I-beam track range and moves with the traction trolley, with buffer devices installed at both ends. The number of trolleys depends on the length of movement. The terminal trolley is fixed at the end of the I-beam guide rail, generally one per mobile machine. This series of trolleys comes in six models: 6#, 8#, 10#, 12#, 14#, and 16#. If users require larger I-beams, please specify when ordering, and our factory can supply the complete set.
The I-beam trolley consists of three parts: the traction trolley, cable trolley, and terminal trolley. The traction trolley follows the cable guiding (traction) device of the mobile machinery, with one per mobile machine, running back and forth with it. The middle cable trolley suspends the cable within the I-beam track range and moves with the traction trolley, with buffer bumpers installed at both ends. The number of trolleys depends on the length of movement. The terminal trolley is fixed at the end of the I-beam guide rail, generally one per mobile machine.
Product Introduction:
HC series cable trolley seriesLight-load cable transmission trolley device is used for suspending and moving cables of mobile power supply machinery during movement, and has been widely applied in various types of lifting machinery. This device features a sturdy structure, flexible movement, and safety and reliability.
Light-load cable transmission trolley consists of three parts: the traction trolley, cable trolley, and terminal trolley. The traction trolley follows the cable guiding (traction) device of the mobile machinery, with one per mobile machine, running back and forth with it. The middle cable trolley suspends the cable within the I-beam track range and moves with the traction trolley, with buffer bumpers installed at both ends. The number of trolleys depends on the length of movement. The terminal trolley is fixed at the end of the I-beam guide rail, generally one per mobile machine.
This series of trolleys comes in five models: Ⅰ, Ⅱ, Ⅲ, Ⅳ, and Ⅴ. If users require 12#, 14#, 16#, or larger I-beams, please specify when ordering, and our factory can supply the complete set.
Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
