HC I-beam Cable Trolley - Yangzhou Dairui Co., Ltd.

Published: 2020-08-11 17:38:39

Category: 电动自行小车输送系统

Product Description

HC I-beam Cable Trolley

Dairui Electric recommends

The HC I-beam cable trolley, GHC series I-beam trolley device is used for the suspension and movement of cables during the movement of mobile power supply machinery, and has been widely applied in various types of lifting machinery. This device has the advantages of sturdy structure, flexible movement, and safety and reliability. The GHC type trolley consists of three parts: the traction trolley, cable trolley, and terminal trolley. The traction trolley follows the cable guiding (traction) device of the mobile machinery, with one unit per mobile machinery, running back and forth with the mobile machinery. The intermediate cable trolley suspends the cable within the range of the I-beam track and moves with the traction trolley, with buffer bumpers installed at both ends. The number of trolleys depends on the length of movement. The terminal trolley is fixed at the end of the I-beam guide rail, generally one per mobile machinery. This series of trolleys is divided into five models: I, II, III, IV, and V. If users adopt 12#, 14#, 16#, or larger I-beams, they can indicate this when ordering, and our factory can supply the complete set.

I-beam Cable Trolley

    The GHC series I-beam trolley device is used for the suspension and movement of cables during the movement of mobile power supply machinery, and has been widely applied in various types of lifting machinery. This device has the advantages of sturdy structure, flexible movement, and safety and reliability.

    The GHC type trolley consists of three parts: the traction trolley, cable trolley, and terminal trolley. The traction trolley follows the cable guiding (traction) device of the mobile machinery, with one unit per mobile machinery, running back and forth with the mobile machinery. The intermediate cable trolley suspends the cable within the range of the I-beam track and moves with the traction trolley, with buffer bumpers installed at both ends. The number of trolleys depends on the length of movement. The terminal trolley is fixed at the end of the I-beam guide rail, generally one per mobile machinery.

    This series of trolleys is divided into five models: I, II, III, IV, and V. If users adopt 12#, 14#, 16#, or larger I-beams, they can indicate this when ordering, and our factory can supply the complete set.

Product Introduction:

The HC series cable trolley is a conductive form for the power supply of crane trolleys. It consists of running wheels, brackets, and support plates. The soft cable is fixed on the support plate, and the traction frame moves synchronously with the cable trolley, thereby achieving the purpose of power supply for the trolley.

The HC series cable trolleys are divided into medium load type, heavy load type, and light load type. Therefore, the running wheels of the trolleys are of three types: Ф80, Ф63, and Ф50, with a load capacity of ≤50∽150kg. Each type is divided into single-layer, double-layer, and three-layer according to the number of support plate layers. Each type has three forms: the first is the cable traction trolley, the terminal is the fixed wire hanging frame, and the middle is the cable trolley (see figure below).

Note: The above information and technical parameters are compiled and released by Yangzhou Dairui Electric Co., Ltd.

← Previous
电动单轨自行小车输送系统-扬州达瑞有限公司 Next →
Electric Self-Propelled Trolley Conveyor System - Yangzhou Darui Co., Ltd.

Product Details

HC I-beam Cable Trolley - Yangzhou Dairui Co., Ltd.

HC I-beam Cable Trolley