2000A busbar, single-pole combined copper busbar, external dimensions width 26MM * height 32MM * length 6000MM. HXPnR-HT, TBHT, TBWT series single-pole safe combined copper busbar is formed by copper conductor wear-resistant layer adding 304 stainless steel strip through cold pressing process to form an integral conductive body, plus PVC, ABS insulation shell, equipped with external current collector, suspension bracket, connection joint, joint protective cover, fixed bracket and other components.
For the 200A copper busbar, its conductive main body is a copper profile with an "H" shaped, "8" shaped, or "" shaped cross-section. Compared with steel, it is safe and energy-saving, and has a smaller specific gravity. Rolling copper into an "H" shape improves its integrity and strength while ensuring a certain conductive cross-sectional area. However, copper has low surface hardness and is not wear-resistant. To make the copper profile meet the practicality of being a conductive busbar, the "H" shaped middle beam is made into an upward arch, and at this position, 304 stainless steel profiles with strong wear resistance and corrosion resistance are embedded according to the specified process, serving as the friction layer and current transmission layer of the conductor. The embedding process ensures the close combination of the stainless steel profile and the copper profile. The current introduced from the copper profile passes through the stainless steel, and the conductive block in the current collector in contact with it transmits the current out during frictional contact, thereby ensuring the continuity of current during the operation of mobile equipment.
On the surface of the 200A busbar conductor, except for the lower opening in contact with the current collector, the rest is protected as a whole by ABS plastic in the longitudinal direction. Therefore, the installed busbar has no exposed conductive parts, which brings great convenience to installation and maintenance. At the same time, the overall shell protection enables the 200A busbar to prevent dust accumulation and resist rain, dew, ice, and snow. The connection between guide rails is a dedicated rail connector, allowing both the rail and the plastic shell to extend into it together. The connection end is safe and reliable, thus ensuring the safe and reliable operation of the equipment. This 200A product is simple and economical to maintain, has a long service life, and high cost performance. With its novel design, reasonable structure, and safe use, it is widely used in places with large currents, high frequency of use, and poor environments, such as shipbuilding, cranes, automobile manufacturing, port loading and unloading, and other translational mobile power supply. It can also be used as a busbar for long-distance power transmission in new markets. If a 3240 insulating material sheath with good temperature resistance is selected, it can also meet the requirements of high-temperature and harsh environments in outdoor and indoor steelmaking, casting, and other industries.
Note: The above information and technical parameters are compiled and released by Yangzhou DARUI Electric Co., Ltd.
