Generally, it is supplied in fixed lengths of 6m.
The installation spacing of the insulating brackets for steel busbar is generally 3m.
The busbar is divided into single-line type and double-line parallel feed type. Except for the double-line parallel type which is indicated by JGH-□II, the single-line type is not additionally annotated.
The installation methods of the busbar are generally the upper sliding contact and lower sliding contact, and other installation methods can also be adopted according to user requirements.
The installation brackets for the busbar are generally one every 3m. In special cases, reinforcement measures can be taken to appropriately expand the distance. The phase-to-phase distance between three busbars is 400mm. If it is a low-impedance busbar, the phase-to-phase distance can be expanded to 450mm.
Generally, it is supplied in fixed lengths of 6m.
The installation spacing of the insulating brackets for steel busbar is generally 3m.
The busbar is divided into single-line type and double-line parallel feed type. Except for the double-line parallel type which is indicated by JGH-□II, the single-line type is not additionally annotated.
The installation methods of the busbar are generally the upper sliding contact and lower sliding contact, and other installation methods can also be adopted according to user requirements.
The installation brackets for the busbar are generally one every 3m. In special cases, reinforcement measures can be taken to appropriately expand the distance. The phase-to-phase distance between three busbars is 400mm. If it is a low-impedance busbar
, the phase-to-phase distance can be expanded to 450mm.
Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
